The intolerable weather conditions in Dubai have resulted in countless traffic accidents, particularly during the summer when temperatures can approach 50 degrees. Motorists must take measures and always check that their tyres are in good condition. Heat puts a strain on not only the tyres, but also the rest of the vehicle. Under the hood, you'll find the air conditioning, suspension, and a slew of other components. As a result, maintenance is critical, and failing to do so could result in serious consequences. How can you reduce the chances of an accident or injury? There are five key steps to remember at all times: 1. Tire Inspections on a Regular Basis It is critical to inspect your tyres on a regular basis throughout the year, not just during the summer. In the summer, however, they are more susceptible to cracks, cuts, and other issues. Tires with cracks and cuts may need to be rotated or possibly replaced. Check the tread depth of your tyres at a reputed garage, such as Orange Auto in Al Quoz, where expert technicians will inspect the tread depth and advise you on what needs to be done. The minimum permitted tyre depth in the UAE is 1.6mm, although new tyres normally have an 8mm tread depth. Motorists should avoid reaching this level as it may increase the chance of an accident, and it is recommended that you change your tyres once the depth exceeds 3mm. 2. Tire Pressure Checks Every Month Tire pressure drops roughly two pounds of air per month, but in the scorching heat of Dubai, this rate accelerates, posing a problem because low tyre pressure impacts braking distance and vehicle control. Tires with reduced pressure can wear out faster, resulting in higher fuel consumption. Most gas stations provide air gauges that can be used to monitor tyre pressure. The recommended tyre pressure is listed in the car handbook or on the driver's side of the vehicle, and it varies from one manufacturer to the next. Remember that tyres should be examined 2 hours after the car has been driven; otherwise, add 0.3 bars to the suggested level to get a correct result (The reading should be taken for all four tires). 3. Check the balance of the wheels If the wheels aren't balanced properly, it impacts the car's handling. The weight of the car is evenly distributed by balancing the wheels, but even a quarter of an ounce off can cause considerable vibrations and strain on the suspension components. Wheel balancing should always be done by a qualified and experienced team, such as those at Orange Auto. 4. Check the alignment of your tyres Even if the wheels are perfectly aligned, some sections of the suspension may be worn out, causing the tyres to be misaligned. Blowouts can happen when your tyres aren't aligned properly, posing a major risk to you and other drivers. Your tyres should be adjusted if you think you're traveling straight but your steering isn't centered. Also, if you're drifting to one side, your tyres should be inspected. 5. Give heed to the vehicle's load suspension Overloading your car puts additional strain on the tyres, increases fuel consumption, and affects the vehicle's stability and handling. To ensure safe and smooth driving, you must ensure that all of its components, including shock absorbers, are in good working order.
0 Comments
Leave a Reply. |